DINION capture 5000

DINION capture 5000

SPECIFICATIONS

  • DINION 2X technology produces clear, consistent,
    accurate license plate images
  • Night Capture Imaging System ensures 24/7
    performance and eliminates headlight glare
  • Advanced Ambient Compensation minimizes
    overexposed plates for improved ALPR accuracy
  • Adjustable imaging modes allow configuration for
    regional plate characteristics
  • IP and analog versions

TABLE DESCRIPTION:

Brand Model DINION capture 5000
Operational Range 3.8 to 28.0 m (12.5 to 92.0 ft)
IR Illumination Pulsed LED array, 850 nm
Nominal Plate Width North America: 110 pixels Europe: 130 pixels (with 4CIF encoding at optimal capture distance)
Usable Plate Width North America: 80–140 pixels Europe: 100–170 pixels (with 4CIF encoding over capture range)
Maximum Capture Speed 225 km/h (140 mph) Must meet 30° mounting criteria.
Automatic Mode Switching Adjustable switch point depending on ambient light levels, mode selectable
Analog Camera
Sensor type 1/3-inch CCD, monochrome
Active Pixels (PAL) 752 x 582
Active Pixels (NTSC) 768 x 494
Horizontal Resolution 540 TVL
Video Output Composite video 1 Vpp, 75 ohm
Synchronization Internal only
Auto Black Automatic continuous, Off
Dynamic Range 120 dB (20-bit image processing)
Dynamic Noise Reduction Auto, On/off selectable
Sharpness Sharpness enhancement level selectable
AGC AGC On or Off (0 - 30 dB) selectable
Cable Compensation Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial communication)
Camera ID 17 character editable string, position selectable
Test Pattern Generator Color bars 100%, Grayscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane
Modes 6 preset programmable modes
Remote Control Bilinx coaxial bi-directional communication
Video Motion Detection One area, fully programmable
Privacy Masking Four independent areas, fully programmable
Controls OSD operation (multi-lingual)
Lens 5-50 mm varifocal, calibrated to optimal capture distance
IP Camera
Sensor
Sensor type 1/3-inch CCD, monochrome
Active Pixels (PAL) 752 x 582
Active Pixels (NTSC) 768 x 494
Video
Video Compression H.264 (ISO/IEC 14496-10); M-JPEG, JPEG
Data Rate 9.6 Kbps to 6 Mbps
Resolution Horizontal x vertical (PAL/NTSC ips)
4CIF 704 x 576/480 (25/30 ips)
CIF 352 x 288/240 (25/30 ips)
Overall IP Delay Min. 120 ms, Max. 240 ms
GOP Structure I, IP, IBBP
Frame Rate (per stream) 1 to 25/30 (PAL/NTSC) H.264 1 to 25/30 (PAL/NTSC) M-JPEG
Modes 6 preset programmable modes
Dynamic Range 120 dB (20-bit image processing)
AGC AGC On or Off (0 – 30 dB) selectable
Auto Black Auto, On/off selectable
Privacy Masking Four independent areas, fully programmable
Controls OSD operation (multi-lingual)
Video Motion Detection One area, fully programmable
Test Pattern Generator Color bars 100%, Grayscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane
Camera ID 17 character editable string, position selectable
Synchronization Internal only
Lens 5-50 mm varifocal, calibrated to optimal capture distance
Network and Storage
Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP, SNTP, SNMP, 802.1x, UPnP
Encryption TLS 1.0, SSL, AES (optional)
Ethernet STP, 10/100 Base-T, auto-sensing, half/ full duplex, RJ45
PoE Supply IEEE 802.3at compliant
Local Storage Supports microSD cards (SDHC)
Electrical
Input Voltage
• Analog Camera 11–30 VDC or 24 VAC ± 10%
• IP Camera 11-30 VDC, or 24 VAC ± 10%, Power over Ethernet+ (IEEE 802.3at, class 4)
Power Consumption
• All Models 22 W, maximum
• 12 VDC 20 W, typical at –40°C (–40°F) 13 W, typical at 20°C (68°F)
• 24 VAC 18 W, typical at –40°C (–40°F) 11 W, typical at 20°C (68°F)
• PoE+ 13 W, maximum 11 W, typical